SPECIFICATIONS

EXPAND ALL COLLAPSE ALL

  • Engine

    ModelS6D140E
    Type4-cycle, watercooled, overhead valve, turbocharged diesel engine
    AspirationTurbocharged
    No. Cylinders6
    Bore140 mm
    Stroke165 mm
    Piston Displacement15.24 ltr
    Horsepower, Net209 kW / 280 HP

  • Blade Range

    All blade movements and positions can be hydraulically controlled from the operator's seat.
    MAXIMUM SHOULDER REACH OUTSIDE REAR TYRES (FRAME STRAIGHT):
    Right2,400 mm
    Left2,400 mm
    Maximum lift above ground420 mm
    Maximum drop below ground680 mm
    Cutting angle60.5° / 118.5°
    Maximum bank cutting angle90°
    Hydraulic blade tip49° forward / 5° backward

  • Brakes

    Service brakeFoot operated, wet, multiple disc brakes are air-actuated on 4 rear wheels and sealed for adjustment-free operation. Two, crossed brake lines for sure braking.
    Parking brakeMechanical, dry, disc type actuated on transmission output shaft. Spring-applied and air-released.

  • Capacities (Refilling)

    Fuel tank500 ltr
    Coolant58 ltr
    Engine38 ltr
    Transmission25 ltr
    Final drive63 ltr
    Tandem case (each)190 ltr
    Hydraulic oil80 ltr

  • Blade Equipment

    DRAWBAR: 
    A-shaped, U-section, press formed and welded construction for maximum strength.
    CIRCLE:
    Hydraulically controlled, internal gear type circle with six guide shoes for smooth 360° rotation.
    Circle diametre (outer)1775 mm
    BLADE: 
    Blade base3100 mm
    Blade load14145 kg
    CUTTING EDGES:
    Flat type cutting edges meet SAE standard J738.
    No. cutting edges2
    Length2438 mm
    Height254 mm
    Thickness25 mm

  • Frame

    FRONT FRAME STRUCTURE
    Frames are articulated by two hydraulic cylinders. Box-sectioned front and rear frames are steel plate welded construction and connected with an articulation pin. One-piece-frame design for the front frame in which hydraulic piping is installed offering excellent front visibility for more precise operations.
    Height 400 mm
    Width 350 mm

  • Front Axle

    TypeReverse Elliot-type front axle.
    Centre ground clearance680 mm
    Hydraulic front wheel lean angle, right or left18°
    Oscillation angle (total)32°

  • Hydraulic Control Unit

    HYDRAULIC PUMPS:
    One variable-capacity piston pump powers the work equipment and steering system; capacity278 ltr
    One gear pump for HYDROSHIFT transmission; capacity133 ltr
    One gear pump for differential; capacity17 ltr
    HYDRAULIC MOTOR: 
    Piston-type hydraulic motor. Output power used for blade rotation.
    Horsepower49 kW / 66 HP
    HYDRAULIC CYLINDERS:

  • Instrumentation

    ELECTRIC MONITORING SYSTEM WITH DIAGNOSTICS
    Metres / Gauges / Monitoring SystemService metre, Air pressure gauge, water temperature gauge, fuel gauge, dust indicator, blade bank pin retract indicator, electronic display monitoring system (for final-drive oil temperature, engine oil pressure, coolant level, coolant temperature, air pressure, alternator changing, engine oil level, hydraulic oil level, engine preheating), speedometre.
    Warning lights / IndicatorHead lights, front working lights, working lights for blade, rear working lights, back-up light, stop and tail lamps, panel lamp.
    Pilot check valvesFor blade lifting, blade tipping, front wheel leaning, drawbar sideshift, and frame articulation cylinders. Rear drawbar.

  • Moldboard

    Hydraulic blade sideshift and hydraulic blade tip control. Circle drive slip clutch.
    Blade4878 mm

  • Operating Weight

    Includes lubricants, coolant, full fuel tank, hydraulic equipment and operator.
    Total26350 kg
    On rear wheels18380 kg
    On front Wheels7970 kg

  • Rear Axle

    Full-floating rear axle is made of forged heat-treated steel.

  • Ripper

    REAR MOUNTED RIPPER:
    Four parallel linkage type with hydraulically controlled raise and lower functions, this ripper can
    No. of shanks3
    Max. digging depth480 mm
    Max. lift above ground675 mm
    Max. digging width2980 mm
    Additional weight (including front push-plate)2585 kg

  • Steering

    Full-hydraulic orbit-roll type steering control system with two steering cylinders are directly actu
    Minimum turning radius7.9 m
    Maximum steering angle of front wheels, left and right50°
    Frame articulation angle, left and right25°

  • Hydroshift Transmission

    The Komatsu HYDROSHIFT transmission consists of planetary gears and hydraulically actuated and force-lubricated multiple-disc clutches, assuring light-touch, effort-minimising shifting. Both speed shifting and direction changes are completed by a single lever. With the inching pedal, precise finishing operation and smooth machine starts are ensured. A super wide range of 8 forward and 8 reverse speeds match all job requirements. Accidental machine starts are prevented by a gearshift lock device and engine starts only when the shift lever is set in the parking position.
    SPEEDS (AT RATED ENGINE SPEED)
    Gear Forward Reverse
    1st 4 km/h 4.3 km/h
    2nd 5.4 km/h 5.8 km/h
    3rd 8 km/h 8.5 km/h
    4th 11.5 km/h 12.2 km/h
    5th 15.8 km/h 16.9 km/h
    6th 21.4 km/h 22.8 km/h
    7th 31.3 km/h 33.4 km/h
    8th 44.9 km/h 47.9 km/h
    Max. drawbar pull 14705 kg

  • Wheels, Front and Rear

    Tyres23.5 - 25 -12 PR (L3) rock-type tyres
    Tyre rims19.50 x 25 WTB
    Inflation pressure2.6 kg/cm2

GD825A-2 Motor Graders

Developed as a minesite support grader for both construction and maintenance applications, our 209 kW GD825A-2 grader features Komatsu quality and durability to deliver high productivity and reliability with excellent availability. As with all our graders, key components are designed and manufactured by Komatsu to work together in an integrated package. And it comes standard with our Komtrax remote monitoring and location system, backed by our Australia-wide service and support network.

GD825A-2 Motor Graders

Current Offers

High Stability

Weight distribution on the front and rear wheels is well balanced, particularly the large weight on the front wheels leads to less side slip and greater productivity under heavy-duty conditions. The GD825A-2 features a large blade force to easily penetrate the ground on tough haul roads, ensuring efficient grading operation with fewer passes.

Articulated Frame

A 25 degrees frame articulation gives the GD825A a minimum turning radius of 7.9 m, making it easy to maneuver in tight quarters. Three basic operating postures are available to meet your varying needs: Straight frame suitable for long-pass grading, articulated frame for tight turning and offset frame for locating drive wheels on prepared ground.

High Blade Performance

The operator can position the blade at the desired bank cutting angle up to 90 degrees on either side, without leaving the operator's compartment. The high blade rotating speed facilitates quick blade changes for increased productivity. A large shoulder reach and hydraulic blade tip control allow the operator to match the GD825A-2 to the most demanding applications.

Take the next steps

CONTACT US

SIGN UP TO OFFERS & NEWS

FIND US
Cookies are small text files created by a web browser when a user visits a website. Cookies are stored on your device. Some cookies are only stored for the duration of your site visit whilst others are stored for longer periods of time. The information stored in a cookie is transferred between a website and the browser to provide enhanced functionality and improve the user experience when using the website. Komatsu may collect certain information such as browser type and operating system through the use of cookies to improve your experience. You acknowledge this by using our website